ME5675/ME5514 Additive Manufacturing and Advanced CAD Coursework Brief | BUL

Looking for Plagiarism-Free Answers for Your US, UK, Singapore, New Zealand, and Ireland College/University Assignments?

Talk to an Expert
Published: 16 Nov, 2026
Category Coursework Subject Engineering
University Brunel University London Module Title ME5675/ME5514 Additive Manufacturing and Advanced CAD
Module Code: ME5675/ME5514

 

Assessment Title: Additive Manufacturing and Advanced CAD

 

Assessment Set By: Dr Bin Zhang  
Distribution Date: 02/10/2026

 

Submission Deadline: Week 11-exact date TBC

 

Feedback to Student By:

(form MAE-A03)

30th Jan 2027

 

Assessment Weighting: 70%

 

Indicative Student Time Working on Assessment  >90 hours

 

Assessment Type:

(Individual or Group)

Individual

 

 

 

Main Objectives of the Assessment:

Objective 1: To learn the state of the art in advanced additive manufacturing and its impact on manufacturing.

Objective 2: To have knowledge of a range of additive manufacturing processes, capabilities and materials.

Objective 3: To enable students with more advanced features of CAD.

 

Brief Description of the Assessment:

Background: This module has two parts, i.e.  1) Additive Manufacturing led by Dr Bin Zhang, and 2) CAD training led by Dr Bertrand Delpech. You are required to undertake this coursework to fulfil the requirements of this module. The coursework will be assessed, and the marks awarded will contribute towards 70% of your final overall marks for this module ME5675/ME5514. The CAD in-class examination will attribute to the remaining 30% marks of ME5675/ME5514. 

The coursework includes part 1, part 2 and part 3, which contributes to your final overall marks of 20%, 20% and 30% of ME5675, respectively. Coursework part 1 has 10 questions based on the lab sessions from week 3 to week 9. Coursework part 2 has one oral presentation (10 minutes). Coursework part 3 requires a report based on the literature.

Deadline: 

All three parts of the coursework must be submitted by Week 11 (exact date TBC).

Requirement: Follow the instructions below:  

1.    Coursework part 1:

Coursework part 1 has 10 questions based on lab sessions from week 3 to week 9. Journal papers and 10 questions will be given in lab sessions. The answer to each question should be no more than 200 words. References will not be counted in the 200-word limit.

The final submission of Coursework Part 1 must be made via WISEflow by the deadline. Coursework Part 1 contributes 20% of your final mark.

2.    Coursework part 2:

Coursework part 2 has one oral presentation (10 minutes). You can choose one presentation topic from below, but you can also self-define the presentation topic. If you would like to define your own topic.

The additive manufacturing application in:

➢  mechanical engineering 

➢  automotive engineering

➢  aerospace engineering 

➢  civil engineering 

➢  bioengineering 

➢  pharmaceutical engineering 

➢  fashion industry 

➢  food industry  

In the 10-minute presentation, you can have maximum 10 slides (1 slide for the title page, 1-2 slides for the introduction 5-6 slides for the main content and results analysis. 1 slide for the conclusions).

The oral presentation will be in week 9 (Friday). The oral presentation and presentation slides contribute equally to the marks. The Coursework part 2 contributes towards 20% of your final mark.

3.    Coursework part 3 

Coursework part 3 requires writing a report. The report must be on one of the following topics, i.e., the additive manufacturing application in: 

➢  mechanical engineering 

➢  automotive engineering

➢  aerospace engineering 

➢  civil engineering 

➢  bioengineering 

➢  pharmaceutical engineering 

➢  fashion industry 

➢  food industry  

Please select one application category. If you have any difficulties choosing your topic.

  • You should undertake a literature search using resources such as the internet, libraries, journals, periodicals, etc. (Hint: Use Google Scholar and Web of Science). Please note that access to free journal papers may only be available via university computers (or network).

  • Assimilate your findings from the literature and undertake a critical review to establish an understanding of the additive manufacturing technologies in the application area that you choose. Your report should include (1) identifying the appropriateness of different AM technologies for a range of materials and applications, (2) recognising the need for different design techniques for AM process and associated limitations and (3) assessing the costs and scalability associated with AM.

  • Use the provided Microsoft Word template. Failure to comply with the guidance provided means that your report may not be accepted. The report will be no more than 6 sides (A4) and will incorporate the following sections. You are given a rough overview to the expected size of each section: (1) Introduction (10%) - ½ side; (2) Main context (includes headings & subheadings) (75%) – 4-5 sides.

(3) Conclusion (10%) - ½ page; Formatting/references/grammar (5%). The words should be no more than 4,000 words.  

  • References are mandatory but will not be counted in the 6-side limit, and references will not be counted in the 4,000-word limit. The final submission of Coursework Part 3 must be made via WISEflow by the deadline. Coursework Part 3 contributes 30% of your final mark.  

 

Learning Outcomes of the Assessment:

Knowledge & Understanding

  • Demonstrate knowledge of additive manufacturing (AM) technologies, materials, and applications in different industries.

  • Recognise design considerations, limitations, and economic implications of AM processes.

Cognitive Skills

  • Apply theoretical concepts to practical lab-based problems.
  • Critically evaluate and compare AM technologies for suitability and performance.
  • Synthesise findings from literature to form evidence-based conclusions.

Practical & Transferable Skills

  • Communicate technical information effectively through a concise oral presentation.
  • Conduct literature searches, analyse academic and industrial sources, and reference appropriately.
  • Present findings in a structured written report, demonstrating critical review and professional standards.

Assessment-Specific Outcomes

Part 1 (20%): Apply lab-based knowledge to short-answer technical questions.

Part 2 (20%): Deliver a clear and well-structured oral presentation on AM applications.

Part 3 (30%): Produce a literature-based report critically reviewing AM applications, highlighting materials, design methods, limitations, and scalability.

 

Approach through which a student can demonstrate learning outcomes and MARKING CRITERIA:

Marking Criteria:

Coursework Part 1 – Lab questions (20%)

  • Accuracy and relevance of answers (40%)
  • Application of theory to lab work (30%)
  • Clarity, structure, and conciseness (20%)
  • Appropriate referencing (10%)

Coursework Part 2 – Oral Presentation (20%)

  • Content relevance and critical analysis (40%)
  • Structure and organisation of slides (20%)
  • Clarity of delivery and time management (20%)
  • Professional presentation style and engagement (20%)

Coursework Part 3 – Report (30%)

  • Depth and breadth of literature review (30%)
  • Critical analysis of AM technologies and applications (30%)
  • Structure, coherence, and clarity of writing (20%)
  • Use of references, formatting, and academic standards (20%)

Format for the assessment/coursework and general guidance:

(Guidelines on the requirements, expected format and length of the submitted piece of work)

  • You must fill in and sign the provided electronic cover (e-cover) sheet and affix it as the front page of your submission on WISEflow.

  • Adopt good report writing skills such as legible and good quality figures, figure numbering and captions, table numbering and heading, use of units, citing all figures in the main body text, proofreading for typos and referencing cited papers using the Harvard referencing guide.

 

Indicative Reading List:

Reading list available on Brightspace; papers provided in lab sessions.

 

Engaging with Artificial Intelligence (AI):

RESTRICTED PERMISSION

In this assessment, the use of generative artificial intelligence (AI) is only permitted as far as:

In completing Coursework Parts 1, 2, and 3 for this module, the use of generative artificial intelligence (AI) tools (e.g., ChatGPT) is permitted only under the following conditions:

Permitted Uses

  • Grammar and spelling checking.
  • Formatting and referencing guidance (e.g., correct use of citation styles).
  • Brainstorming or generating ideas at the early stage of topic selection.

AI tools may be used for:

Prohibited Uses

  • Generate or write direct answers to the assessment questions in Coursework Part 1.
  • Produce presentation slides or presentation scripts in Coursework Part 2.
  • Write, draft, or structure sections of the Coursework Part 3 report.
  • Fabricate references, data, or analysis.
  • Replace critical engagement with the academic literature.
  • AI tools must not be used to:

AI-generated text or images as your own work constitutes a form of plagiarism. You, therefore, must acknowledge and describe how you have used AI in your work. This should be in an included “Acknowledgement Section”. You must also familiarise yourself with the University’s policy on Using AI in your studies here.

The submitted assignment will be assessed by an AI detection software package. Any unacknowledged use of AI identified will be further investigated, and consequences might ensue.

 

Avoiding Academic Misconduct:

  • This report is an individual assignment and will be assessed as such.

  • Before working on and submitting your coursework, please ensure that you understand the meaning of plagiarism, collusion, and cheating (including contract cheating) and the seriousness of these offences.

  • Academic misconduct is serious, and being found guilty of it results in penalties that can reduce the class of your degree and may lead to you being expelled from the University. Information on what constitutes academic misconduct and the potential consequences for students can be found in Senate Regulation 6.

  • You may also find it useful to read this PowerPoint presentation, which explains, in plain English, the different kinds of misconduct, how to avoid (even accidentally) committing them, how we detect misconduct, and the common reasons that students give for engaging in such activities. You must also familiarise yourself with the University’s policy on plagiarism here.

If you are experiencing difficulties with any part of your studies, remember there is always help available:

  • Speak to your module leader or your personal tutor.
  • Alternatively, if you prefer to speak to someone outside of the Department, you can contact the Student Support and Welfare team.

 

Submission Instructions:

  • You must submit your coursework as a PDF file on WISEflow by 11th of December 2025 by the time specified on WISEflow. You can follow the link to WISEflow through the module’s section on Brightspace or log in directly

  • You can also specify a file naming convention, for example. The name of your file should be the module code, an underscore and then your student number (e.g., ME5675-ME5514_0612345.pdf).

 

Late Submissions:

  • The clear expectation is that you will submit your coursework by the submission deadline stated in this assignment brief guide.

  • In line with the University’s policy on the late submission of coursework, coursework submitted up to 48 hours late will be accepted but capped at a threshold pass (D- for undergraduate or C- for postgraduate).


  • \Work submitted over 48 hours after the stated deadline is classified as a non-submission (NS) and will automatically be given a fail grade (F). Please refer to the University’s policy and Mechanical and Aerospace student information pages for information on submitting late work, and penalties applied and procedures in the case of Extenuating circumstances.

Get Answer of ME5675/ME5514 Additive Manufacturing and Advanced CAD CW Brief

Get Expert Help on WhatsApp

Are you working on the Additive Manufacturing and CAD Training Coursework at Brunel University London? This module covers two key areas: Additive Manufacturing, led by Dr Bin Zhang, and CAD training, led by Dr Bertrand Delpech. Workingment Academic Writing Services provides guidance to help you understand manufacturing processes, technical concepts, CAD design tasks and coursework requirements. Get assistance with structuring your answers and presenting your technical work clearly through our Engineering Assignment Help service. You can also access our Assignment Help UK for guidance with your academic tasks.

60-Second Quote

Get Your Free Academic Quote

No hidden fees · Instant response · 100% confidential

Workingment Unique Features

Latest Free Samples for University Students

FLAT 15% OFF

AVAIL FLAT 10% OFF

+ Extra 5% OFF

FREE PLAGIARISM REPORT
Applicable on all orders
ORDER NOW →
★★★★★ 4.9/5 | 5118+ Reviews
WhatsApp
Online Assignment Help in UK