EG7004 Soil Structure Engineering Coursework Assignment 1, Individual Design Report 2026 | UEL

Looking for Plagiarism-Free Answers for Your US, UK, Singapore, New Zealand, and Ireland College/University Assignments?

Talk to an Expert

Published: 28 Oct, 2026

Category	Assignment	Subject	Engineering
University	University of East London (UEL),	Module Title	EG7004 Soil Structure Engineering

EG7004 Soil Structure Engineering (University of East London): Coursework Semester A 2026/27

University	University of East London (UEL), School of Architecture, Computing and Engineering
Module	EG7004 Soil Structure Engineering
Assessment	Coursework Assignment 1, individual design report
Weighting	60%
Handout / Submission	5 October 2026 / 15 December 2026, 4.00 pm (single PDF via Turnitin)
Learning Outcomes	2, 4, 5, 6, 7 and 8

This year’s EG7004 coursework is a preliminary design for the support system of a deep, rectangular braced excavation in granular soil (loose, medium dense and dense reddish brown medium SAND over a variable groundwater level). Each student uses an individual dataset from Moodle for excavation depth H, width W, time open and soil design parameters, and compares three options: a CIRIA C517 DPL design, and Oasys FREW analyses of a steel sheet pile wall and a concrete diaphragm wall.

Need Help With Your EG7004 Soil Structure Engineering Coursework?

Talk to Our Engineering Experts

Design Approaches

Design using the DPL Method as defined in CIRIA Report C517 (1999) Temporary propping of deep excavations: guidance on design. Assume wall penetration below formation equal to 10% of the total depth of excavation.
Design using Oasys FREW software, using the same prop spacing as the DPL design and letting the software determine the required wall penetration, for (a) an AZ 32-750 steel sheet pile wall with 273 mm diameter, 10 mm wall CHS props, and (b) a uniform 500 mm thick concrete diaphragm wall with the same CHS props.

Section properties come from the ArcelorMittal Piling Handbook and the Tata Steel Blue Book (structural hollow sections). Each student must use only their own assigned dataset.

Design Report Sections

(a) Executive summary on one page: the design, design philosophy and recommended design, clear enough for a contractor to build from. [10 marks]
(b) Outline design proposal based on CIRIA C517, with prop levels and construction sequence. [20 marks]
(c) Design actions from CIRIA C517, mainly a summary of expected prop loads. [10 marks]
(d) FREW analysis of the steel sheet pile wall: prop loads, wall bending moments and expected deflections. [20 marks]
(e) FREW analysis of the concrete diaphragm wall: design actions and overall performance. [10 marks]
(f) Dewatering: how it might be achieved and how it affects wall design and construction. [10 marks]
(g) Summary discussion comparing the analyses, recommending the flexible or stiff wall with reasons and suggested final prop loads. [10 marks]
(h) Design construction drawing of the final design with all detail needed to build the support system and excavate. [10 marks]

Submission Notes

Sections (b) to (e) must explain and justify all assumptions, summarise the key design elements with drawings, and report expected performance (prop loads, maximum moments, wall deflections).
Design calculations go in brief, relevant appendices referenced from the main text; reports padded with unnecessary computer output lose marks.
Computer output must show both input and output values. Word-processed, 1.5 line spacing, Arial 12 pt, one legible PDF through Turnitin.

Marking Rubric Weightings

Executive summary	10%
Outline design proposal and construction sequence (CIRIA C517)	20%
Analysis of design actions (CIRIA C517)	10%
FREW analysis: steel sheet pile wall	20%
FREW analysis: concrete diaphragm wall	10%
Dewatering discussion	10%
Comparative discussion and final recommendation	10%
Design construction drawing	10%

Request Answer of this Assignment

Share this with your Friends

Facebook

Instagram

Working on EG7004 Soil Structure Engineering Coursework? Engineering coursework requires a clear understanding of soil behaviour, structural principles, technical analysis and the ability to present engineering findings accurately. Workingment Academic Writing Help Platform can support you with organising your ideas, improving report structure and presenting technical information clearly. You can also explore our Engineering Assignment Examples for reference when approaching similar topics and use our Coursework Writing Services for guidance with research, technical explanations and academic presentation. Get support tailored to your coursework requirements and develop a well-structured, academically sound submission.

Latest Related Questions

COMP47420 Exploring Search Operators for Investigations Assignment: Bing OSINT Operators and Case Exercise | UCD

MGMT902 Enterprise and Information Systems Assignment 2: Cyber Security Governance and ICT Strategy Report | AIS

LAWCOMM 785 Patent Practice Assignment 2026: Letter of Advice on Challenging eVTOL Patent Applications in NZ and Australia | UOA

No hidden fees · Instant response · 100% confidential

EG7004 Soil Structure Engineering Coursework Assignment 1, Individual Design Report 2026 | UEL