Southern Cross University Assignment Questions, Briefs & Handbooks

SVY2202 Assignment 3 Question 1: You are working with a commercially available LiDAR system, the Velodyne VLP-16, mounted on a drone. This system operates at a laser wavelength of 903 nm and has a typical beam divergence that creates a ground footprint of approximately 0.15 m2 when flown at an altitude of 60m.

SVY2202 Assignment 2 Question 1: This assignment is designed to enhance practical knowledge of GCP utilisation in drone mapping and its influence on the accuracy of the final output.

SVY2202 Assignment 1: The provided portrait image was captured using a smartphone camera equipped with a 5mm lens and a 1/2.3" sensor (6.17mm × 4.55mm) at a drone distance of 25 meters (d in figure 1) .

ENV4203 Assessment 1 Report: Information provided is generally adequate; if any assumptions are made, these should be clearly stated giving your reasons/justifications.

You are a new teacher in a secondary school where the Years 7-10 science units are being rewritten for the Australian Curriculum, version 9, using the Launch, Inquire, Act(LIA) planning framework of the Australian Academy of Science.