TU721 Aviation Technology Assignment Instructions 2025/26 | TU Dublin

TU721 Assignment Instructions:

Planning and Execution of a Base Maintenance Visit for a Boeing Converted Freighter 737-82R(BCF) Aircraft

You are part of the Production Planning team at an MRO facility.

Your team has been contracted to perform a base maintenance visit (C-check) on a 73782R(BCF) aircraft. The aircraft is a mid-to-late-life freighter, operating is short-haul in the UK and Europe.

You will need to familiarise yourself with the following documents:

• An Approved 737-82R(BCF) Maintenance Programme (AMP).
• A sample aircraft utilization profile (FH/FC/calendar).
• The C check schedule and AMM refernces as per the MPD.
• Access to the AMM and Boeing Taskcards You have been requested to create the following:
• Bill of Work (recommend excel / table format)
• Bill of Material (rotables)
• Initial maintenance work package (consider taskcards)
• Supporting documentation for the visit.

Using the provided documents;

• Extract the scheduled maintenance tasks from the AMP relevant to the upcoming Check.
• Identify tasks by type: System & Powerplant, Zonal, and Structural.
• Remember to include CMR and AWL tasks due at this interval.
• Identify which tasks will require tooling and test equipment.
• Group tasks into logical work packages based on access requirements, manpower, and tooling.
• Identify tasks requiring special procedures (e.g., NDT, corrosion inspections).
• Include an estimated man-hours and required skill levels. (Including buffer)
• Suggest which tasks if they had non-routine findings could impact the planned TAT and CRS date.
• Propose contingency plans for common discrepancies (e.g., corrosion, wiring damage, component wear).
• Estimate how long you would require the aircraft to be in a hangar
• Forecast required rotables.
• Describe five (5) potential challenges you may face while the aircraft is in on check and what contingency plans you could put in place.
• Ensure all tasks are traceable to AMP, MPD, and regulatory requirements.
• Include references to manuals (AMM, SRM, IPC, etc.) used in task planning.