BTEC Level 3 Unit 19 Assignment 2 Brief : Electronic Devices and Circuits

Assignment 2

Learning Aim(S):

A: Explore the safe operation and applications of analogue devices and circuits that form the building blocks of commercial circuits

Assessment Criteria

A.P1 Simulate, using captured schematics, the correct operation of at least one diode, transistor, and operational amplifier circuit. (Y/N)

A.P2 Build at least one diode, transistor, and operational amplifier circuit safely and test the characteristics of each one. (Y/N)

A.P3 Explain, using the simulation and test results, the operation of at least one diode, transistor, and operational amplifier circuit. (Y/N)

A.M1 Simulate, using accurately captured schematics, the correct operation of at least one diode, transistor, and operational amplifier circuit. (Y/N)

A.M2 Build at least one diode, transistor, and operational amplifier circuit safely and test the characteristics of each one accurately. (Y/N)

A.M3 Analyse, using the simulation and test results, the operation of at least one diode, transistor, and operational amplifier circuit. (Y/N)

A.D1 Evaluate, using language that is technically correct and of a high standard, the operation of at least one diode, transistor, and operational amplifier circuit, comparing the results from safely and accurately conducted simulations and tests. (Y/N)

Simulate the construction and testing of the circuits of figures 3 and 4 recording the output voltage and working out the Voltage Gain for both Inverting and Non-Inverting Amplifier.

Figure 3. Inverting Amplifier

Figure 4. Non-inverting Amplifier