A2379C Pharmaceutical Distribution Audit Assignment Report: CAPA Plan for GDP Compliance and Risk Management

Published: 24 May, 2025
Category Coursework Subject Education
University Republic Polytechnic (RP) Module Title A2379C Good Distribution Practice
Assessment: Report 
Count words: Max 1,500 Words

A2379C Coursework Assignment Question

As a Quality Assurance (QA) Officer in a pharmaceutical distribution company, you have received three (3) visual audit findings from a recent internal audit. Your company’s management has requested a written report to assess the issues, evaluate the risks, align each with Good Distribution Practice regulatory expectations and propose Corrective and Preventive Action (CAPA) plan for each of the audit finding.

A2379C Audit Finding #1

Figure 1 show a line chart depicting the internal van temperature across a 24-hour delivery route for a cold chain medicine. The acceptable transportation temperature is between 2–8°C for the cold-chain medicine.

A2379C Good Distribution Practice

A2379C Audit Finding #2

Figure 2 shows a checklist that was used at a warehouse during the inbound operation of a consignment of a batch of pharmaceutical product.

A2379C Good Distribution Practice

A2379C Audit Finding #3

Figure 3 shows a security camera view of a warehouse, with an open inventory system on a computer screen.

Are You Looking for Answer of A2379C Coursework Assignment

Order Non Plagiarized Assignment

Report Task & Structure (Max 1,500 Words)

Your report should contain the following:

  1. Executive Summary
    Summarise the three audit findings, overall risks, and the need for immediate Corrective and preventive actions.
  2. Introduction to Good Documentation Practices (GDP)
    Briefly explain the purpose and importance of GDP in pharmaceutical supply chains. Include key sources (WHO GDP, HSA Guidelines, PIC/S etc).
  3. Analysis of each audit finding
    For each scenario:
    • Describe the non-compliance based on the figure shown
    • Identify key risks and potential consequences
    • Align with relevant GDP regulatory expectations
  4. CAPA Plan (for each audit finding)
  5. Implementation & Monitoring Strategy
    Explain how the CAPAs will be rolled out and monitored
  6. Conclusion
  7. References

As a general guideline, the assignment should be typed in Arial font style with a 12-point font size, 2 cm margins, and a minimum of 1.5 line spacing. You should ensure that only relevant references or citations are included in your answers to each of the question.

References to resources should also be included where appropriate. These will be taken into consideration during the awarding of marks for the assignment.

A2379C Referencing Guide

The format of the list of references shall match the style of citing the references. For example, as a numbered sequence or arranged by alphabetical order of the first author’s last name. Other than that, there are many styles of presenting the reference. The students may follow any of the styles adopted in books (in the bibliography section) or the journal papers (in the References section). The requirement is that the information given must be sufficient for accessing the reference material, and this usually needs the last names, the year of publication, title of the article/book, and the volume numbers and page numbers. For online references, the URL must be given with the date accessed.

Two Main Ways To Present Journal References

  1. Authors’ surnames listed in alphabetical order
    Andrews, S.S. 2002. Terrestrial orchids. Cambridge University Press, UK. 222 pp.
    Wong, T.Y. , Yong, M., and Seet, A.M. 2000. Armillaria nabsona, a new species from western North America. Mycologia 88: 484-491.
    Zhang, W. T. 2001. Identification of orchid mycorrhizal fungi by restriction fragment length polymorphisms of ribosomal DNA. Mycoscience 39: 179-183.
  2. Using a numbering system in the text with the first paper cited being [1], next paper [2], and so on. If first paper is cited again, it is still [1]
    [1] Wong, T.Y. , Yong, M., and Seet, A.M. 2000. Armillaria nabsona, a new species from western North America. Mycologia 88: 484-491.
    [2] Ang, Y.S. 2002. Morphological characterisation of fungal endophytes from Spathoglottis plicata. M.Sc. Thesis, National University of Singapore, Singapore.

Citing And Referencing Electronic Sources

Holland, M. 2004. Guide to citing internet sources [online]. Poole, Bournemouth University.
bournemouth university /library/using/guide_to_citing_internet_sourc. html [Accessed 17 March 2005].

Note: Be careful citing information from WWW sites; most are not peer-reviewed and there is no guarantee that the information is correct

Citing A Book As Reference

N.M. de Roos. (2004). Functional foods, cardiovascular disease and diabetes. Cambridge England: Woodhead Publishing Limited.

Buy Answer of A2379C Coursework Assignment & Raise Your Grades

Request to Buy Answer

Need help with assignments A2379C Good Distribution Practice Assignment? Then you have reached the right place, our expert team is providing Coursework Help. we have got you covered. Here is the best solution for your assignment. We also provide free assignment samples here and their content is written by PhD expert writers, AI free and plagiarism-free. We cover all the important areas of Good Distribution Practice, now be tension free and give us your assignment, we will deliver your assignment on time with well research. Contact us today and relieve your stress!

Workingment Unique Features

Hire Assignment Helper Today!


M30029 Advanced Thermodynamics and Fluid Mechanics Coursework Brief 2024-25 | UoP

The numerical values in this coursework are based on your student number. Your student number is a six- or seven-digit code UP QWERTYZ. In the assignment below, you should replace letters Q, W, E, R, T, Y, Z with digits from your student number.

MANG6046 Optimisation and Decision Modelling Individual Coursework Brief Sem 01 | UoS

This piece of work will count for 80% of the overall mark for MANG6046. You need to submit a report of your comment on a project and an Excel file (not multiple Excel files) in two separate folders (one is called Individual Coursework_Reports Only; the other is called Individual Coursework_Excel Files.

CTEC3754D Malware Analysis Coursework Brief 2024-25 | DMU

Evaluate malware evasive techniques, e.g., packing, obfuscation, and anti-disassembly. antis and pro-boxing, etc. and how to circumvent them. Investigate, select, and apply real malware through static and dynamic analyses using standard tools and techniques.

CMP7205 Applied Statistics—PG CWK Assignment Brief 2024-25 | BCU

CMP7205 Task: Report your statistical analysis on a reasonably complex dataset(s) in a professional manner, using appropriate probabilistic and/or statistical techniques implemented with modern statistical software.

Managing Customer Experience CW1 Summative Assessment Brief | BPP University

You are required to write a 2500-word report on the customer experience (referred to as CX from now on in this brief) strategy.

Leading Through Digital Change CWK Assessment Brief | BPP

In recent decades, businesses around the world have faced challenges by the persistent stream of disruptive digital innovations (DDI). T

Leading Through Digital Change Formative CW3 Brief - BPP

LTDC CW3 : A digital transformation strategy outlines how a company will utilise digital technology to continually develop novel products, services, processes, and channels of engagement (Pratt, 2023).

FY028 Inquiry Based Learning CW1 Assignment Brief June 2025 | BNU

FY028 Assignment task: For this assignment you will need to investigate the impact of technological trends on customer satisfaction at a small or medium-sized restaurant of your choice.

6020SSL: International Logistics CW1 Assignment Brief | CU

6020SSL: Analyse  and  critically  evaluate  a  range  of  logistics  practices  applied  across  different  industries  and geographical situations.  Examine  the  implications  of  inventory  holding  and replenishment  policy  when  considering  other  logistics functions and business constraints.

CC5067NI Smart Data Discovery Coursework 01 Question Paper Spring 2025 | LMU

Contract cheating (also known as assessment outsourcing, commissioning or ghost writing) is when someone seeks out another party, or an AI generator service, to produce work or buy an essay or assignment.

Online Assignment Help in UK