ENGR5001 Stem Methodologies Group Assessment 3 Brief - 2025

Published: 17 May, 2025
Category Assignment Subject Engineering
University Oxford Brookes University (OBU) Module Title ENGR5001 Stem Methodologies
PART 1: GROUP RESEARCH PROPOSAL DUE 30/5/25 PART 3: INDIVIDUAL REFLECTION OF GROUP PROCESS DUE ON FRIDAY 30th MAY 2025
PART 2: GROUP ORAL PRESENTATION MAY 12th- May 23rd Count words: 1200 word 

ENGR5001 PART 1: GROUP RESEARCH PROPOSAL (100 points)

DUE 30/5/25 (End of Semester WEEK 14), BY 12pm (NOON)

Choose a topic that is important to your team. It can NOT be a topic that a team member used for their Assessment 2 introduction/problem statement. It must be a new and different topic.

WHAT TO DO 

Write a 1200 wordresearch proposal on your chosen project/topic. The 1200-word count includes in-text citations but excludes the reference list, figure captions, title, keywords, and team names. Please use double-spacing to allow for effective feedback to be written on your submission.

Consider the merits of the project topic/research question before you start. 

Is the chosen topic: 

  1. Focused? Relevant? Original? 
  2. Able to be addressed using research methods (NOT a literature review)? 
  3. Feasible to answer within 12-18 months? 
  4. Able to be answered via the proposed research design? 

ENGR5001 Your written proposal needs to include the following sections: 

ENGR5001 Stem Methodologies Assessment 3

ENGR5001 Stem Methodologies Assessment 3

Do you need ENGR5001 Assignment of This Question

Order Non Plagiarized Assignment

ENGR5001 Format & writing style guidelines:

Format, Structure & Style (20 marks) 

-Formal, consistent scientific writing (no bullet points!)

-Appropriate syntax, grammar, punctuation & spelling

 -Overall structure must be organised, clear, easy to identify and follow your idea development

-Paragraphs must build the story and there needs to be a fluid connection in content and tone between each one.

-In-text citations and full reference list must be included and in APA 7th format

-At least 20 references of peer-reviewed journal articles 

-1200 word count total, including in-text references but excluding reference list, your team and member names, figure captions, title, and keywords.

Figures: Figures may be used as appropriate. These MUST be correctly attributed and referenced where the work is not your own. References for figures are included in the reference list at the end, and citations are typically included in the figure captions (figure captions are always required).

ENGR5001 PART 2: GROUP ORAL PRESENTATION (100 points)

DUE IN WORKSHOP SEMESTER WEEK 12 & 13 (MAY 12th- May 23rd)

WHAT TO DO: The Presentation

You will pitch your research proposal as a team during your final workshop in weeks 12 & 13. You MUST be present for both weeks (unless discussed prior) and will be required to provide peer feedback. All team members must contribute to the creation and presentation of this part of the assessment. Format:7-minute oral presentation, in person, using Powerpoint/alternative presentation software of your choosing. 

Aim: You will 'pitch' your idea to your peers. This is not the place to include everything you possibly can, but to curate your proposal so that your audience is engaged and understands your idea, and is excited by it! Use appropriate visual aids to engage your audience and provide greater understanding, and ensure the audience knows of the purpose and importance of your research.

All figures included must be appropriately cited and referenced.

Include the following in your presentation:

1. Title Page  Include proposal title, team name and team members. 
2. Motivation/background for your research proposal Use carefully selected literature to highlight the motivation for designing this project, and include any aspects your audience must know to understand your topic. 
3. Aims of the project State aims briefly & hypothesis if appropriate.
4. Significance of the project Explain why this is a significant project, what the benefits may be, and who might benefit from the outcomes
5. Research Design Experimental design & controls; variables; limitations. 
6. Research Methods  Include data gathering and analysis processes, and how the data is to be presented. Include the timeline of the project.
7. Expected outcomes What outcomes do you expect to have? E.g. policy change, increased crop yield, improved protection from scammers etc. 
8. Summary Summarise your project's key points to your audience. 

ENGR5001 PART 3: INDIVIDUAL REFLECTION OF GROUP PROCESS (50 points)

DUE ON FRIDAY 30th MAY 2025 (SEMESTER WEEK 14) 12pm (NOON)

This reflection is about how you felt you and your team worked together on this assignment. Group process refers to how you and your group work together to get the written proposal and presentation done. The reflection needs to be 2 pages in length, 12 pt font, with standard margins (2.4cm border) and double-spaced. 

WHAT TO DO

You will need to answer the following questions in your peer evaluation form:

  1. Describe how well members of your group were able to communicate with each other. Alternatively, describe any communication problems/issues within your group.
  2. Did you meet outside of class to establish goals and stay in tune with each other?
  3. What are you most proud of and most worried about when working in your groups?
  4. Do you think you did your fair share? 5.Did other group members do their fair share?

Buy Answer of ENGR5001 Assignment & Raise Your Grades

Request To By Answer

 Struggling with your ENGR5001 Stem Methodologies Assignment? Don’t stress! Our Engineering Assignment Help Service is here to help. Whether you need assignment help UK or expert university assignment help, we’ve got you covered. Our professional writers craft high-quality, plagiarism-free papers tailored to your needs. Plus, explore our free assignment samples to get started. Ace your assignments effortlessly with our trusted service—because you deserve top grades without the hassle. Let us handle the writing while you focus on learning. Order now and succeed with confidence!

If you want to see the related solution of this brief then click here: Engineering Assignment Examples

Workingment Unique Features

Hire Assignment Helper Today!


BBSC4103 Assignment: Strategic Supply Chain Management Question Semester 2025 | OUM

BBSC4103 Part 1: The purpose of this assignment is to help learners study the important of strategic alliances by focusing on inter-organisational relationships and the challenges in managing them.

BBHI4103 Industrial Relation Assignment Question | Open University Malaysia

BBHI4103 Part 1: The purpose of this assignment is to enhance learners' ability to discuss the perspectives in industrial relations and evaluate which perspective is the best for the selected organisation

Scientific Research Review Assignment 4 | USM

You are required to write an individual review paper on a topic of advancements in your area of study. This paper must demonstrate your ability to plan, execute, and present a scholarly task ethically and professionally.

BTEC Level 5 Unit 16: Computing Research Project Assignment Part 1 Brief

BTEC Level 5 Unit 16: Assignment Brief: Artificial intelligence is at the forefront of innovation within Computer Science that uses a combination of logic, algorithms and large data sets to produce an AI model.

ACC210 Accounting for Decision Making and Control TMA Assignment Question | SUSS

ACC210 Question 1  Cool Strokes Pte Ltd ("CS") manufactures white board markers for educational use. The company's markers are sold by the box at $50 each in 20x3.

BM414 Financial Decision Making CW1 Assignment Brief (SIG) | BNU

Suppose you are part of the Accounting and Finance team at Sheffield Insulation Group (SIG) plc. You are required to write a report to the senior management team of SIG plc, discussing the importance of accounting and finance functions.

7167EXQ Environmental Management Systems and Auditing CW1 Brief | CU

7167EXQ Assignment Task: Essay on the relevance of organisational behaviour on environmental management in an organisation You may approach this essay in one of two ways depending on your experience and knowledge.

BENV1015 History of Design Thinking Assignment 1 Brief Term 2 2025 | UNSW

The assignment develops your knowledge of historical design ideas and communication skills corresponding to the course learning outcomes below. It aims to give an appreciation of the implications of past movements, practitioners, and projects for current challenges.

7ME500 Advanced Mechanical Design and Manufacturing Engineering CW1 Report Assessment Brief | UoD

An integrated design, material selection, and manufacturing approach provides one of the key enabling capabilities needed to effectively evaluate specific areas of initial concept development and perform detailed engineering design and analysis throughout a product development cycle.

Atomic Structure & Bonding Assignment : Lab-Based Element Analysis and Molecular Case Study

Atmospheric ions are electrically charged particles that occur naturally in the atmosphere. They form in the upper atmospheric layers mainly because of the action of ultraviolet radiation from the sun, as well as in lower atmospheric layers as a result of radioactive radiation and cosmic rays.

Online Assignment Help in UK